| Products
> Pressure Sensitive Tapes > Fiberglass
Cloth (380 Series)
|
| Product Description
|
 DuraStick® Fiberglass Cloth Tapes consist of a tightly woven, high tensile fiberglass cloth coated with a high-temperature silicone or acrylic adhesive. These tapes posses a high thermal rating, are flame retardant, abrasion and edge-tear resistant, conformable, and provide superior solvent resistance. DuraStick® Fiberglass Cloth Tapes are an excellent choice for electrical and mechanical applications where chemical resistance properties of PTFE (Fluon®) are not required.
|
DuraStick® Fiberglass Cloth Tape Characteristics |
DuraStick® 380 series of Fiberglass Tapes are engineered to retain the distinctive properties of woven fiberglass, however by adding an adhesive, the need for mechanical fastening is eliminated.
|
Typical Applications |
| |
Electrical and Electronics:
 Coil, component, and cable wrapping
Motor lead and internal connections
Insulating coil connections and coil ends
Anchoring terminal boards
Coil outer wraps
Holding coil leads
Cable harness wrapping
|
Other:
Economical thermal spray tape
Sealing and enclosing hermetically
-packaged components
Additional applications exist. Contact AFC for more specific information.
|
Styles Available |
Product
ID |
Substrate |
Adhesive
System |
Total
Thickness (in.) |
Adhesion
(oz/in. of width) |
Tensile
Strength*
(lbs/sq in) |
Dialectric
Strength
(volts) |
Max. Operating
Temp. (F) |
| 380-07S |
Glass-Cloth |
Silicone |
0.007 |
40 |
160 |
4500 |
500 |
| 380-10S |
Glass-Cloth |
Silicone |
0.010 |
40 |
175 |
5000 |
500 |
| 380-07A |
Glass-Cloth |
Acrylic |
0.007 |
40 |
160 |
4500 |
350 |
| 380-10A |
Glass-Cloth |
Acrylic |
0.010 |
40 |
175 |
5000 |
350 |
|
Although material width is standard, additional lead-time may be required. Please note: Additional thicknesses, styles and widths available upon special request. Other colors are available in above styles. Consult factory.
*Disclaimer: The above tensile values are from Table 6 of Specification D579 and actual tensile values will vary. AFC tests tensile strength to ASTM D828 and actual tensile values will be provided upon request.
|
