| Products
> Pressure Sensitive Tapes > Polyimide (390 Series)
|
Product Description |
 DuraStick® Polyimide (Kapton®) Tapes provide the greatest dielectric strength of any product in AFC’s line of tapes. These tapes are manufactured by applying a high-temperature silicone or acrylic adhesive to a polyimide film. Because of their unique properties, DuraStick® Polyimide Tapes are ideal for use as electrical insulation in the aerospace and electronics industries.
|
What are DuraStick® Polyimide (Kapton®) Tapes? |
DuraStick® Polyimide Tapes are engineered to retain the distinctive properties of PTFE. By adding an adhesive to one side, the need for mechanical fastening is eliminated. DuraStick® Polyimide Tapes possess a thin, strong film which has excellent dielectric strength, chemical and moisture resistance, excellent tensile strength and modulus and weathering capabilities. These tapes, because of their coating of Kapton® film; offer a combination of properties, which make it ideal for electrical uses. These properties are maintained over a wide temperature range and used in field applications where the environmental temperatures as low as -269°.
|
Typical Applications |
| |
Electrical:
 Splicing tapes on insulated wire
Reinforcing tape for wire breakouts
in wire bundles
Masking tape to protect PC board edges
through wave soldering
Mask off gold fingers for circuit board
printing, wave soldering and
cable bundling
Formed coil insulation
Substrates for flexible printed circuits
Motor slot liners
Magnet wire insulation
Transformer and capacitor insulation
|
Magnetic and pressure-sensitive tapes
and tubing
Electrical insulation for wire, cable and
other electronic equipment
Aerospace:
Insulation tapes for extreme temperature
applications
Inherently flame retardant
Additional applications exist. Contact AFC for more specific information.
|
Styles Available |
Product
ID |
Adhesive
System |
Nominal
Thickness (substrate) |
Nominal
Thickness (adhesive) |
Adhesion
(oz/in. of width) |
Tensile
Strength*
(lbs/sq in) |
Elongation
(%) |
Dialectric
Strength
(volts) |
Max. Operating
Temp. (F) |
| 390-01S |
Silicone |
0.001" |
0.0015" |
25 |
30 |
40 |
9000 |
500 |
| 390-02S |
Silicone |
0.002" |
0.0015" |
25 |
60 |
45 |
13,000 |
500 |
| 390-05S |
Silicone |
0.005" |
0.0015" |
25 |
125 |
50 |
18,000 |
500 |
| 390-01A |
Acrylic |
0.001" |
0.0015" |
25 |
30 |
40 |
9000 |
500 |
| 390-02A |
Acrylic |
0.002" |
0.0015" |
25 |
60 |
45 |
13,000 |
500 |
| 390-05A |
Acrylic |
0.005" |
0.0015" |
25 |
125 |
50 |
18,000 |
500 |
|
Although material width is standard, additional lead-time may be required. Please note: Additional thicknesses, styles and widths available upon special request. Other colors are available in above styles. Consult factory.
*Disclaimer: The above tensile values are from Table 6 of Specification D579 and actual tensile values will vary. AFC tests tensile strength to ASTM D828 and actual tensile values will be provided upon request.
|
